SR09318RC
Fabrication, modification, and installation of a new vertical fin spar in accordance with Global Helicopter Technology, Inc., Drawing number VTF-030-800, Revision, E, dated June 6, 2001, or later FAA approved revision. Held by Global Helicopter Technology INC., which holds 5 approved modifications in all. Last revised December 8, 2011. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Bell Helicopter Textron
- Models
- 204B
- Type certificate
- H1SW
- On this site
- Bell 204 7 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 8, 2026.