SA296AL
Installation of 'quick-change' leading edge for horizontal stabilizer. Held by Aircraft Rebuilders, INC, which holds 2 approved modifications in all. Last revised December 15, 1971. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 180H, 180G, 180F, 180E, 180D, 180C, 180B, 180A, 180
- Type certificates
- 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6
- On this site
- Cessna 180 Skywagon 2,606 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.