SA2340NM
Installation of SWS-11000 tundra tires, wheels and hubs. Held by Schneider Richard J, which holds 33 approved modifications in all. Last revised August 14, 1986. System: landing gear.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 180B, 180K, 180J, 180H, 180G, 180F, 180E, 180C, 180A, 180, 180D
- Type certificates
- 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6, 5A6
- On this site
- Cessna 180 Skywagon 2,606 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 5, 2026.