SA1900NM
Installation of Schneider wheel skis, 6-inch to 10-inch aluminum wheel adapters and 8.50-10 6-ply tires on main landing gear. Held by Schneider Richard J, which holds 33 approved modifications in all. Last revised November 12, 1982. System: landing gear.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The New Piper Aircraft Inc.
- Models
- PA-18-\"150\"
- Type certificate
- 1A2
- On this site
- Piper/Cub Crafters PA-18 46 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 5, 2026.