SA1209WE
Replacement of wing drag wires in two outboard wing bays with 3/16 inch Stratton Aero Enterprises drag wires. Held by Univair Aircraft CORP, which holds 40 approved modifications in all. Last revised August 11, 1978. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 140, 120
- Type certificates
- A-768, A-768
- On this site
- Cessna 120 661 registered
Cessna 140 1,838 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.
