SA02672CH
Installation of 8:50 tires and tubes in lieu of original components in accordance with installation instructions listed on AML No. SA02672CH. Held by Svenn S Aviation LLC, which holds 9 approved modifications in all. Last revised August 14, 2009. System: landing gear.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.; Piper Aircraft Inc.
- Models
- PA-20, PA-20-115, PA-20-135, PA-20S, PA-20S-115, PA-20S-135, PA-22, PA-22-108, PA-22-135, PA-22-150, PA-22-160, PA-22S-135, PA-22S-150, PA-22S-160
- Type certificates
- 1A4, 1A4, 1A4, 1A4, 1A4, 1A4, 1A6, 1A6, 1A6, 1A6, 1A6, 1A6, 1A6, 1A6
- On this site
- Piper PA-20 Pacer 323 registered
Piper PA-22 Tri-Pacer and Colt 2,940 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 5, 2026.
