Special Conditions: VT DRB Aviation Consultants, Airbus Model A330-300 Airplanes; Dynamic Test Requirements for Single-Occupant, Oblique (Side-Facing) Seats With or Without Airbag Devices or 3-Point Restraints
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published December 11, 2019 for Vt Drb Aviation Consultants, covering the A330-300. System: cabin, seats and restraints.
What it applies to
- Applicant
- Vt Drb Aviation Consultants
- Makes
- Airbus
- Models
- A330-300
- On this site
- Airbus A330 154 registered
- Published
- December 11, 2019
- Effective
- January 26, 2020
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued for the Airbus Model A330- 300 airplane. This airplane, as modified by VT DRB Aviation Consultants (VT DRB), will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is single-occupant, oblique (side-facing) seats with airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.