Special Conditions: Airbus Model A330 Series Airplanes; Seats With Inertia Locking Devices
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published May 28, 2019 for Airbus, covering the A330-Series. System: cabin, seats and restraints.
What it applies to
- Applicant
- Airbus
- Makes
- Airbus
- Models
- A330-Series
- On this site
- Airbus A330 154 registered
- Published
- May 28, 2019
- Effective
- May 28, 2019
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued for the Airbus Model A330 series airplane. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is seats with inertia locking devices. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.