Special Conditions: Bombardier Inc., Model BD-700-2A12 and BD- 700-2A13 Series Airplanes; Flight Envelope Protection: High Incidence Protection System
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published September 4, 2018 for Bombardier INC, covering the BD-700-2A13 Series, BD-700-2A12. System: instruments and avionics.
What it applies to
- Applicant
- Bombardier INC
- Makes
- Bombardier
- Models
- BD-700-2A13 Series, BD-700-2A12
- On this site
- Bombardier BD-700 Global Express, 5000 and 6000 656 registered
- Published
- September 4, 2018
- Effective
- April 30, 2018
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued for the Bombardier Inc. (Bombardier), Model BD-700-2A12 and BD-700-2A13 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a high incidence protection system that replaces the stall warning system during normal operating conditions, prohibits the airplane from stalling, limits the angle of attack at which the airplane can be flown during normal low speed operation, and cannot be overridden by the flight crew. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.
