ST01796CH
Install geared aileron per Basler Turbon Conversions LLC Drawing 25703 latest FAA approved revision, and Design Change Notice D-1 latest FAA approved revisions. Held by Basler Turbo Conversions LLC, which holds 8 approved modifications in all. Last revised March 17, 2003. System: flight controls.
What it applies to
- Kind of product
- Aircraft
- Design holder
- McDonnell Douglas Corporation; McDonnell Douglas Corporation; McDonnell Douglas Corporation; McDonnell Douglas Corporation
- Models
- DC3C-S1C3G, DC3C-S4C4G, DC3C-SC3G, DC3D-R-1830-90C
- Type certificates
- A-669, A-669, A-669, A-669
- On this site
- Douglas DC-3 155 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.