ST00720DE
Installation of sensors and provisions for future capability to monitor aircraft control surface deflections, existing pilot control input signals, and other aircraft systems in accordance with Sierra Nevada Corporation Drawing List, Report Number MDL-0142-25-9315, Revision B, dated February 24, 2011, FAA approved July 25, 2011, or later FAA approved revision. Held by Sierra Nevada Corporation, which holds 30 approved modifications in all. Last revised July 25, 2011. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Cessna Aircraft Company
- Models
- 680
- Type certificate
- T00012WI
- On this site
- Cessna 680 Citation Sovereign and Latitude 695 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.