ST00084WI
Replacement of the Exhaust Gas Temperature indicators with B&D Instruments Models 65006-003, 65006-004, 65006-005, 65006-006, 65006-007. Recording Exhaust Gas Temperature indictors in accordance with B&D Installation Manual 65006-003-011, Revision D dated November 19, 1996 or later FAA approved revision; and Flight Manual Supplement 65006-003-013 dated July 26, 1993, Flight Manual Supplement 65006-003-014 dated October 3, 1994, or Flight Manual Supplement 65006-003-015, 65006-003-16 or 65006-003-017 dated November 16, 1996. Held by Teledyne Controls, which holds 71 approved modifications in all. Last revised November 3, 2011. System: engine.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company
- Models
- 747-100 Series, 747-100B Series, 747-100B SUD Series, 747-200B Series, 747-200C Series, 747-200F Series, 747-300 Series, 747SP Series, 747SR Series
- Type certificates
- A20WE, A20WE, A20WE, A20WE, A20WE, A20WE, A20WE, A20WE, A20WE
- On this site
- Boeing 747 192 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 8, 2026.