SA9080SC-D
Replace 30E94-2 Sensing Element in Janitrol Valve 45E04-1 used on DHC-8 Oil Coolers 28E99-6 and 28E99-7 in accordance with Honeywell LORI Specification LR 0201-117 as reflected on Honeywell LORI Sealed Drawing List SDL3709-1, Revision A, dated 11 October 2005 or later FAA approved revision. Held by Honeywell International INC., which holds 142 approved modifications in all. Last revised September 27, 2021. System: engine.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.
- Models
- DHC-8-101, DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-301, DHC-8-311, DHC-8-315
- Type certificates
- A13NM, A13NM, A13NM, A13NM, A13NM, A13NM, A13NM
- On this site
- Boeing Of Canada/Dehav Div DHC-8 6 registered
Bombardier DHC-8 Dash 8 and Q400 58 registered
Dehavilland DHC-8 28 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 5, 2026.